How to Ship Framed Art with Glass

When to keep, tape, remove or swap the glass in a framed picture, how to pack it box-in-box, what carriers require, and what to do if it breaks.

Estimate a shipment Inc. box, packaging and insurance

To ship a framed picture with glass, leave the glass in place if the frame is small and sound, cover the outside of the glass with low-tack tape, wrap the frame, and pack it box-in-box: a snug inner carton set inside an outer one with about 3 inches of cushioning all round. Skip the tape on pastel or charcoal, and on acrylic. For a large frame or a piece you can’t replace, have a framer swap the glass for acrylic or laminated glass before it travels. If the glass breaks, the recipient should open the box face up, keep the frame level, and lift each shard straight off, so none slide across the art.

Keep the glass, take it out, or swap it

Ordinary picture glass is the dangerous part of a framed piece in transit. It is heavy, and when it breaks it leaves sharp edges sitting on top of the paper or paint. The useful question is whether that glass needs to make the trip at all.

Your pieceWhat to do
Small frame, print or photo you could replace, glass held firmlyLeave the glass in and tape it
Pastel, charcoal or other powdery mediaKeep the glass, don’t tape it, and keep the box flat with the face up
Large frame, or a work you couldn’t replaceHave a framer fit acrylic or laminated glass before shipping
Loose or chipped glass, or frame corners openingRepair it first, or hand it to a fine art shipper

The size threshold comes from the Canadian Conservation Institute’s note on wrapping a painting. It suggests replacing ordinary glass with laminated glass when the work is larger than one square meter, about 39 inches square, with museum-grade acrylic as the alternative. The same note reports that in testing, damage to a painting was often similar whether the glass was taped or not. Tape is a precaution, then, and swapping the glazing is the real fix for a large or valuable piece.

Taking the glass out and shipping it in a separate box sounds safer but carries its own risk. The conservators list it as an option and warn that it means more handling of the artwork itself. Without its glass, a matted print or drawing must also be packed as unframed work, with its face protected from the wrapping.

Acrylic has its own limits. The Institute’s note on glazing materials says plastic breaks less readily than glass and its fragments are less hazardous, but it scratches more easily, bows in large sizes unless it is 3 mm thick, and holds a static charge. That charge can lift loose pigment, so plain acrylic is a poor choice for pastel and charcoal, which is why those works keep their glass. If you can’t tell which you have, acrylic is noticeably lighter than glass of the same size. Your framer can confirm it.

Taping the glass, and leaving acrylic bare

Tape on glass holds the pieces together if the pane cracks, so fewer loose shards can reach the art. The conservators’ wrapping note describes covering the whole outside surface with strips of low-tack protective tape, following the glass maker’s directions about the surface, which matters most on coated or anti-reflective glass. The National Park Service’s Conserve O Gram on packing a framed object adds a practical touch: fold one end of each strip back on itself to make a pull tab.

Two cases call for no tape at all.

  • Pastel, charcoal and chalk. The glazing note warns that static from putting tape on and pulling it off may move pastel from the paper onto the glass. It suggests carrying such work flat and face up instead.
  • Acrylic. It rarely shatters, so tape has little to hold. Tru Vue, which makes museum acrylic glazing, says in its handling tips for acrylic that acrylic-glazed works need no film or skin for shipping, and warns against polishing scratches out of its coated sheets. Adding adhesive to a soft, coated surface gains nothing. The Park Service note does tape Plexiglas too, so if you follow it, use low-tack tape and peel it slowly.

Whoever unpacks the frame should take the tape off soon after it arrives. The wrapping note says to remove it gently and slowly, so the glass doesn’t flex and spring back and its coating isn’t damaged.

Packing a glazed frame box-in-box

  1. Photograph the front, the back and all four corners in good light. Check that the glass sits firmly in the frame and doesn’t touch the art. A mat or spacer should hold it off the surface.
  2. Take off the hanging wire and any hooks.
  3. Tape the glass if it is plain glass and the work isn’t pastel or charcoal.
  4. Fit cardboard corner protectors, then wrap the frame in glassine or clean plastic sheet. Sandwich it between foam sheets and stiff corrugated board cut slightly larger than the frame, and tape the layers so they can’t shift.
  5. Wrap the bundle in bubble wrap and mark which side is the front, as the conservators advise, so the person unpacking knows which way up it lies.
  6. Set it in a snug inner carton with no empty space.
  7. Center that carton in an outer box with cushioning on every side, seal every seam, and put a copy of both addresses inside.

The Park Service method is written for frames no more than 16 inches on any side and lines each of the two boxes with 2 inches of foam. Past that size the note points to other methods, so a large glazed frame is a case for a crate or a fine art shipper.

What the carriers expect of a fragile box

UPS’s packaging guidelines assign a two-box method to sharp and fragile goods. The outer box should be 6 inches longer, wider and deeper than the inner one, with 3 inches of cushioning around the inner box. The same guide puts the duty to pack well on the shipper. Plan for the larger size, because the outer box, not the frame, sets the billable dimensions.

A Fragile label buys no extra care. The UPS Tariff/Terms and Conditions of Service state that UPS gives no special handling to packages marked Fragile or carrying orientation arrows. The terms also let UPS turn down a damage claim when it asks to inspect the original packing and nobody can produce it, and they require notice of a domestic claim within 60 days of delivery. The Postal Service’s claim rules likewise require the recipient to keep the box, all the packaging and the damaged item, and they count 60 days from the date of mailing.

Who should pack it

Packing it yourself suits a small frame holding something you could replace. The cost is materials and your time, and if the glass breaks you lose a pane and perhaps a print.

A pack-and-ship counter takes the packing off your hands, which helps if you lack foam, board and two cartons of the right sizes. Ask what its packing guarantee covers, whether it excludes glass, and the most it pays.

A fine art shipper is the right call for a large glazed piece, glass over pastel or a valuable drawing, an ornate or heavy frame, or anything that needs a crate. These firms build the packing around the object rather than fitting it to stock cartons.

ArtPort is another route when the frame stays in the US and its largest box, 44 x 34 x 4 in, can hold it. The empty foam-lined box comes to you first. Once the frame is packed inside, FedEx or UPS carries it insured to the recipient.

If the glass arrives broken

Send these steps to the recipient before the box leaves, because the first minutes decide how much damage the shards do.

  1. If the box rattles, keep it level and don’t shake it to check. Photograph every side, closing in on dents and crushed corners.
  2. If it has come in from the cold, let it reach room temperature before opening. Tru Vue warns that condensation leaves water spots on its coated acrylic.
  3. Open it on a clean, flat table with the front of the frame facing up. With the face up you can see every piece and lift it off without dragging it.
  4. Wearing heavy gloves, lift each piece straight up. Tilting the frame or sliding the work out from under the glass drags shards across the surface. If the glass was taped, the tape may hold it together, so lift it out in sections.
  5. Don’t brush, blow or wipe the surface. If glass has cut into the paper or paint, or powdery media has shifted, stop and call a paper or paintings conservator.
  6. Photograph each stage, then keep the box, every layer of packing and the broken glass until any claim is settled.

When ArtPort fits

ArtPort suits framed prints, photographs, drawings and paintings in frames that fit its boxes, the largest being 44 x 34 x 4 in, declared at $50 to $10,000 and staying in the US. You pack on your own table, then drop the box at a carrier or book a pickup. If the glass cracks on the way, a claim rests on the condition report: your photos from before dispatch plus the recipient’s from arrival, finished within 24 hours of delivery. So the recipient should photograph the box and frame before lifting a single shard.

It doesn’t fit frames deeper than 4 inches, larger work, pieces worth more than $10,000, anything bound for another country, or a job where you want someone else to pack. A fine art shipper handles those. If your frame fits, put both addresses into the estimate at the top of this page, which prices the box, both journeys and insurance.

Disclaimer: This page may contain AI-assisted content. The information is provided solely as a general guide and may not be correct, complete, or current, including, but not limited to, our full or applicable service offerings. While we strive for accuracy, no guarantee is made regarding correctness or completeness, and no expectation should be made as such.

Frequently asked questions.
Answers to the things we hear most.

Pick a topic from the list below to discover how ArtPort handles shipping, condition reports, insurance, pricing, and more.

ArtPort is a platform for shipping fine art. We send you a box with foam inserts sized for your artwork, you pack and photograph it, and we arrange insured delivery with a major carrier, all tracked from one account.

ArtPort is designed for artists, galleries, collectors, and art businesses that ship flat artwork, such as paintings, prints, and photographs. Whether you send one piece a year or hundreds, the platform scales to fit your needs.

ArtPort currently ships within the United States. The address that receives the empty box and the destination address must both be in the U.S.

Simply create an account, set up your organization, and add a payment method. You can then create your first shipment and check out right away.

Yes. ArtPort is a web-based platform with a responsive design, so you can access it from any device with a modern browser, including desktops, tablets, and smartphones.

Still have questions…

Ship your art, today.

From seamless fulfillment and quality packaging, to full insurance and reliable transportation... your art is protected every step of the way.